Documentation Index
Fetch the complete documentation index at: /llms.txt
Use this file to discover all available pages before exploring further.
Control BirdDog NDI pan/tilt/zoom cameras — drive pan, tilt, zoom, and focus, recall presets, control NDI output and tally, and adjust exposure and power — with live state and triggers.
| Command | What it does |
|---|---|
| Drive | Moves the head in one of eight directions at a pan and tilt speed |
| Stop | Stops pan and tilt movement |
| Go to position | Moves to an absolute pan/tilt position, where 0 is centre |
| Recall preset | Recalls a stored preset |
| Power | Powers the camera on or puts it into standby |
| Command | What it does |
|---|---|
| Set tally | Turns the onboard tally lamp on or off |
| Set NDI mode | Encode transmits the camera as an NDI source; decode stops it |
| Set NDI pipeline | Switches between normal and low-latency mode |
| Use discovery server | Enables or disables the configured NDI discovery server |
| Command | What it does |
|---|---|
| Exposure mode | Sets the exposure mode |
| Backlight compensation | Turns backlight compensation on or off |
| White balance | Sets the white-balance mode |
